To use the AV System
- Move the podium into a position where the cable bundle will reach the wall plates shown above
- Connect the power cable to the 4-Way power plate
- Connect the microphone cable to the jack on the left side of the AV plate
- Connect the network cable to the jack on the right side of the AV plate
To turn on the Projector
- Press the DISPLAY ON button on the Crestron Button Panel
- The screen will lower automatically
- Please do not press any other buttons while DISPLAY ON is blinking
To display a Laptop
- Power on laptop
- Connect your laptop to the VGA cable and 1/8" mini audio cable
- On the Crestron Button Panel, press the Laptop button
- If your laptop does not display correctly on the screen, press the Auto Image button
To display an image from an HDMI source
- Connect your device to the HDMI cable
- Connect your equipment
- On the Crestron Button Panel, press the HDMI or Video button
For voice amplification
- There is a gooseneck microphone attached to the podium
- There is a wireless handheld mic or a wireless lavaliere mic
- Only one of the wireless mics can be used at a time
- An extra microphone can be connected to a wall plate in the front of the room
To play an iPod/Phone/Radio
- Connect to the sound system via the 1/8" mini jack located in the utility room. Ask a staff member for assistance
- Use the radio located in the utility room. Ask a staff member for assistance
Other Information
- Volume is adjusted by a knob on the Crestron Button Panel
- Use the up and down buttons on the Five Way Navigation Pad to manually control the screen
- At the end of class, press the DISPLAY OFF button to turn off the projector
- Shut down the computer at the end of the event
- Never touch the ceiling mounted LCD projector - it is alarmed
For more information, walk in to the Service Desk in Humanities 103 or call 845-257-HELP (4357).
To request technology assistance and support, submit a ticket.
For a one-on-one demonstration of classroom AV technology, request an orientation.