Skip to Knowledge Base content

WH 225 363 365 367 Classroom AV Instructions

WH 219 221 223 225 Touch Panel

WH 219 221 223 225 Room

To turn on the Projector: Press the DISPLAY ON button on the Crestron Control Touch Pad. The screen will lower, and the projector and flat panel monitors will turn on automatically. The flat panel monitors will display exactly what is seen on the projection.

To display the Computer: On the Crestron Control Touch Panel, press the PC button. Power on the computer and log in.

DVDs may be played through the computer.

Laptop Audio allows you to play music from a device with no video connection (iPod, cell phone etc.)

To display the Document Camera: Press the Doc Camera button on the Crestron Control Touch Panel.  The document camera will turn on automatically. Papers or objects placed below the camera lens will be projected onto the screen.

To display a Laptop: Connect your laptop to the 15-pin VGA cable and 1/8" mini audio cable, then power on your laptop. On the Crestron Control Touch Panel, press the Laptop button. A LAN cable is provided if wireless is not used. If your laptop does not display correctly on the screen, press the Auto Image button.

To display an image from an HDMI or Video source: HDMI and analog video ports are provided on the Extron connection panel located at the front of the desk, above the computer. Connect your own equipment. Then on the Crestron Control Touch Panel, press the HDMI or Video button.

Volume is adjusted by a knob on the Crestron Control Touch Panel.

Use the up and down buttons on the Five Way Navigation Pad to manually control the screen.

At the end of class, press the DISPLAY OFF button to turn off the projector. Shut down the computer or document camera. Never touch the ceiling mounted LCD projector. It is alarmed.

For technical assistance, please call x6789 or click HERE to request help 

Details

Article ID: 38664
Created
Tue 9/5/17 2:16 PM
Modified
Tue 9/5/17 2:34 PM